Handheld Transmitter Functions; Replacing Transmitter Battery; Troubleshooting - Duratech DuraLink PL-REM-200 Manuel

Handheld transmitter functions

Replacing transmitter battery

• Remove the philips head screw and open the transmitter
• Replace the battery, respecting the polarity
Battery type: A23 12V

Troubleshooting

PROBLEM
The controller doesn't react
to transmitter commands
The pool lights don't work
Toggle the lamps ON/OFF
Go to next color scenario
Toggle Output A ON/OFF
Toggle Output B ON/OFF
SOLUTION
• Check the battery of the hand-
held transmitter
• The transmitter is not paired-
correctly with the controller.
Repeat the pairing process
• Reduce the distance between
handheld transmitter and PL-
REM-200 and/or remove ob-
stacles
• Check the red status LED
• Check if there is 12VAC output
at the terminals of the controller
• Check the fuse of the controller
If the fuse is ok, and there is still no
12VAC output, contact your distributor
+
-
7