Quax TRENDY 54 04 45 Serie Manuel page 36

LOUISE
TRENDY
Quax Quax
First dreams
® ®
First steps
Step 3 : Use the top 1, the bottom 3, the endsides 2L and 2R, the fi xed shelf 4, both back panels 5, both cross
bars 6, the drawer sides DR2L and DR2R, both drawer fronts DR1, both drawer backs DR3, the door 7, the pairs
of drawer runners ZL and ZR, six bolts H, two clothes rod holders G, thirty-four connectors B, fourty-six wooden
dowels A, two hinges X1 and eight wood screws X4
Tighten six connectors (B) in the drillings on the underside of the top (1). Push six wooden dowels (A) in the holes
provided at the ends of the bottom (3). Push three wooden dowels (A) in the openings on the top of the end sides
(2L and 2R). Tighten ten connectors (B) in the drillings on the inside of the endsides. Push four wooden dowels
(A) in the holes provided at the ends of the back panels (5). Push four wooden dowels (A) in the holes on the ends
of the cross bars (6). Push six wooden dowels (A) into the openings at the ends of the fi xed shelf (4). Push two
wooden dowels (A) into the drillings at one end of the drawer sides (DR2L and DR2R). Push two wooden dowels
(A) into the drillings on the ends of the drawer backs (DR3). Tighten four connectors (B) into the drillings on the
inside of the drawer fronts (DR1). Position the sliders (ZL and ZR) in front of the provided holes of the end sides.
Push a bolt (H) through the front third hole on the runners and tighten. Now insert the other bolts and tighten them
in the sides. Attach both clothes rod holders (G) by means of two wood screws (X4). Push the hinges (X1) into
the drillings of the door (7) and tighten with two wood screws (X4).
36
Kleerkast met één draaideur
Kinderbed met verstelbare bodem
54 04 45xx
01 01 43XX
Schrank mit Drehtür
KInderbett mit verstelbarer Boden
Armoire avec 1 porte battante
Lit enfant avec fond réglable
Wardrobe with one door
Babybed with adjustable bottom