Technical Details - Karomat KD 900-150 Manuel D'instructions

2.TECHNICAL DETAILS

Length
Width
Heigth (without/ with pushbow) 400 mm / 580 mm
Weigth
Voltage
Lead
Motor
Waterpump
Waterconsumption
Waterpressure
High pressure hose
Spouting gun
Watersupply hose
Oil
Warm water supply max.
Order number
Subject to modification.
3. DESCRIPTION
The KD 900-150 / KD 1100-200, a machine built of stainless steel, combines
quality and easy control in one. The machine is equipped with massif rubber
wheels and a pushbow, which allow the machine to be moved easily.
All connections (water, detergent, electricity) and control elements (main switch,
pressure regulator and manometer) are attached to the outer side of the machine,
wich make them easily attainable.
Underneath the hood you will find a 3 cylinder pump, direct driven by an
electromotor. The water which feeds the machine, is pressed out by the pump
under high pressure throug a high pressure hose and a spouting gun. The high
pressure cleaner reaches in this way a high cleaning performance at low water-
consumption. Furthermore the machine is built to add detergent to the water or to
feed it with warm water from a boiler (the watertemperature may never exceed
o
50 C).
KD 900-150
550 mm
620 mm
46,5 kg
380/420 V, 50 Hz
4 m
6.5 Hp / 5 kW
3 cyl. pump with ceramic plungers
900 ltr/h
30 - 150 Bar
10 m
with start stop and dosaging valve
10 m
Airpress oil
50
66501
o
C
16
KD 1100-200
550 mm
620 mm
400 mm / 580 mm
55 kg
380/420 V, 50 Hz
4 m
9 Hp / 7 kW
1000 ltr/h
30 - 200 bar
10 m
10 m
Airpress oil
o
50 C
66523