Télécharger Imprimer la page

F.F. Group WDVC 35 PRO Notice Originale page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
8
| English
ENGLISH
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
The warnings and instructions may result
in electric shock, fire and/or serious injury.
The warning and information signs attached
to the unit provide important information for
safe operation. Part from the information in the
operating instructions comply with the general
safety regulations and regulations for the pre-
vention of accidents.
GENERAL SAFETY WARNINGS
Attention! Never use the vacuum cleaner
without dust bag or filter.
Do not use outdoors.
f
Do not leave vacuum cleaner when plugged in. Turn
f
off the switch and unplug the electrical cord when you
are not using it and before maintenance.
Do not allow to be used as a toy. Close attention is nec-
f
essary when used near children.
Do not handle plug or vacuum cleaner with wet hands
f
or operate without shoes.
Keep the vacuum cleaner clean, free of dust, hair and
f
anything that may reduce airflow.
This vacuum cleaner creates suction and contains a
f
revolving brush roll. Keep hair, loose clothing and all
parts of body away from openings and moving parts.
Do not wipe anything that is burning or smoking, such
f
as cigarettes, matches, or hot ashes.
Do not use to pick up flammable or combustible liq-
f
uids such as gasoline, or use in explosive atmospheres.
For your personal safety always pay attention when
f
cleaning on stairs.
Keep vacuum cleaner away from ovens and stoves, etc.
f
Don't suck at large fragments or sharp objects.
f
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
f
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
Do not abuse the cord. Never use the cord for carrying,
f
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
Do not unplug by pulling on cord. To unplug, grasp
f
the plug, not the cord.
If the cord is damaged, it must be replaced by a quali-
f
fied person in order to avoid any hazard.
GUIDELINES FOR USING EXTENSION CORDS
Make sure your extension cord is in good condition.
f
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
Always replace a damaged extension cord or have
f
it repaired by a qualified person before using it.
Protect your extension cords from sharp objects,
f
excessive heat and damp/wet areas.
Warning: Never use this machine when the
suction power becomes very weak. If this hap-
pens, please check if the dust bag is full (see TO
REPLACE DUST BAG); Then check both filters if
they are dirty (see MAINTENANCE); At last
check the floor brush, tube, hose if any part is
jammed.
Don't use the machine until it comes normal. If the
problem remains, please submit to an authorized
service.
INTENDED USE
This vacuum cleaner indented for sucking up dust and
liquids. It is suitable for connecting electrical power
tools.
TECHNICAL DATA
Article number
Model
Rated voltage
Rated power input
Rated power total
Power Cord Length
Tank
Dust Capacity
Water lift
Weight
Noise
IDENTIFICATION
1. Hose
2. Handle
3. Extension tube
4. Switch
5. Locking block
6. Hose connection
7. Tank
8. Wheel
9. Sliding block
10. Power cord plug
11. Floor brush for carpet and wooden floor
12. Small nozzle brush for sofa, bookshelf, curtain
and furniture, etc.
13. Crevice nozzle for corners, cracks, etc.
14. Floor brush (water picking up use)
15. Adapter
16. Water drain valve
17. Power tool socket
ASSEMBLY
Before operate
1. Install 4 small wheels (P1, P2)
2. Insert the hose connector into the swivel of the Vac-
uum Cleaner (I). (P8, P9)
3. Insert the tubes into the handle with a twisting
force. (P3, P4)
4. Insert the floor brush or the other accessories (P5)
WDVC 35 PRO
43 502
WDVC 35 PRO
V
220-240
Hz
50/60
W
1.200
W
3.200
m
5
l
35
l
35
l
15
kg
10
dBA
80

Publicité

loading

Ce manuel est également adapté pour:

43 502