Appliance Description; Before First Use; Boiling Water - Inventum CBW010 Mode D'emploi

2

appliance description

1. Spout
2. Anti-scale filter
3. Lid
4. Button for opening lid
5. Handle
6. Waterlevel-indicator
7. On/ off switch with pilot lamp
8. Base
2
3

before first use

Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any
damage, possible from transportation. Place the appliance on a stable and heat resistant surface.
The minimum amount of water must be 0.5 litres. The maximum amount of water to be used is 1.7 litres.
Before use you must fill the waterkettle to the maximum level and boil this amount. Do this twice. Throw away the boiled water and
rinse the kettle with cold water. The appliance is now ready to use.
The kettle is only suitable for boiling water. Never fill the kettle with milk, tea, coffee or others drinks.
4

boiling water

Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the
appliance. Put the appliance on a cool, flat and stable surface. Connect the appliance to an earthed socket. You can adjust the
length of the cord by pulling it out from, or pushing it into, the interior of the appliance.
1. Open the lid by pushing the button.
2. Fill the kettle with an amount of water and close the lid by pushing it down.
3. Place the kettle on the base and make sure that the plug is in the socket.
4. Switch the kettle on by pressing the on/off switch down to position 1.
The pilot lamp will light up. The kettle will now boil the water.
5. The kettle will automatically switch off when the water is boiled. The pilot lamp will switch off.
12
• English
1
3
4
5
6
7
8