Tangent Danmark Pixel Manuel De L'utilisateur page 3

Quick connect guide
How to: Connect your Tangent Pixel to a Bluetooth device
(smartphone)
When you have unpacked the Tangent Pixel:
1. Connect the power adaptor to the Tangent Pixel
2. Push the power button 1-2 sec.
a. The power button will light up
b. You will hear a sound "Boing"
c. The light in the button will begin to flash, which
3. Turn on Bluetooth on your device (smartphone)
4. Search for Bluetooth devices on your Smartphone
5. Select "Tangent Pixel" and you will connect to it.
6. A sound "Bing Boing" indicates that you are connected, and
the light will stop flashing and be solid.
7. Play music
When your smartphone has been connected earlier the Tangent
Pixel will remember it.:
1. Push the power button 1-2 sec.
a. The power button will light up
b. You will hear a sound "Boing"
c. The light in the button will begin to flash, which
d. A sound "Bing Boing" indicates that you are
2. Smartphone is automaticly connected.
3. Play music.
Play music via AUX input:
1. Push the power button 1-2 sec
2. Connect AUX kabel
3. Play music.
indicate that the Pixel is in pairing mode.
indicate that the Pixel is in pairing mode.
connected, and the light will stop flashing and be
solid.