Do You Want To Enter Special Days - Siemens Synco 700 RMH760B Mode D'emploi

Do you want to enter special days?

You can enter a total of 16 special days and holiday
periods (see previous section). During special days, the
normal heating program for space heating is not active,
but a special program.
Date
On submenus Entry 1, Entry 2, Entry 3 , etc., you need to
enter for each special day:
• Menu option Start: Date, year and time of day of the
special day
• Menu option End:
For 1 special day: Confirm the data that appear in the
pop-up window.
For 2 or more successive special days: Date, year and
time of day of the last special day
• Menu option Reason: Special day
Paths for RMH760B:
Building Technologies / HVAC Products
Main menu > Heating circuit ... > Holidays/special days > Entry ...
Main menu > DHW > Holidays/special days > Entry ...
Main menu > Holidays/special days > Calendar
Paths for RMK770:
Every entry can be deleted (menu option Cancel entry).
Heating program
Enter the heating program for special days on the Time
switch 1 menu (
page 10). It will apply to all special
days.
If required, also set Time switch 2.
DHW heating
If your controller also controls DHW heating, you can
also enter the following:
• DHW time program for special days, on the
DHW time switch menu (
• Time program for circulating pump on special days; on
the Circ pump time switch menu (
CE1B3133x2-en
page 18)
page 18)
74 319 0560 0 a
21
10.10.2006