Nibe Contura C310 Mode D'emploi page 16

GB
16
Installation distances
C310
INSTALLATION AGAINST COMBUSTIBLE WALLS
Combustible wall
100
500
875
* If the stove is placed on a hearth plate made of glass for example (accessory), the height from the floor is affected by a distance corresponding to the thickness of the hearth plate, for a free standing
glass hearth plate this is 10 mm.
** To prevent discolouration of painted non-flammable walls we recommend that the same side distance as to combustible walls is used.
Combustible roof
750
375
The minimum distance in front of
the stove opening to combustible
parts of the building or interior
decoration must be at least 1,4 m.
The dimension diagrams only
show the minimum permitted
installation distances for the
stove. When connecting to a steel
flue, also note the safety distance
requirements of the flue. The
safety distance between an un-
insulated flue and a combustible
part of the building should be at
least 450 mm.
375
Ø150 140
30
45
80
INSTALLATION AGAINST FIREWALLS
Fire-retardant wall of
brick or concrete
100**
475
A = height from floor to chimney
connection upwards
B = height from floor to c/c chimney
connection rear
C = height from floor to air inlet
D = height from floor to lower edge
of hatch
E = height from floor to lower edge
of heat deflector
Air inlet Ø65