Installation - Qilive Q.6517 Manuel D'utilisation

4. INSTALLATION

Warning! Disconnect the appliance from the wall outlet
before you install the refrigerator.
4.1 Unpack all parts
After unpacking, check for completeness of delivery and for shipping damage. If your delivery is
damaged or incomplete, please contact our after-sales service.
4.2 Choose an appropriate location
Warning! Position the appliance so that it is not
exposed to direct sunlight. This appliance should not
be used outdoors or exposed to rain.
Warning! The appliance must be separated by a
distance of at least 50 cm from heat sources (such as
stoves, ovens, radiators, etc.) and at least 5 cm from
electric ovens.
1. Place the refrigerator in a well ventilated room on a dry, stable and level surface, away from
direct sunlight and other heat sources.
2. Ensure sufficient air circulation at the rear of the appliance. Do not place the appliance against
a wall to avoid noise caused by vibration. Make sure that the air can still circulate freely
around the appliance. Insufficient ventilation would result in malfunction and increased energy
consumption. Leave a space of at least 10 cm between the refrigerator and the wall, and at
least 30 cm between the top of the refrigerator and the ceiling.
3. Leave enough space to access and open the door easily.
4.3 Level feet
If the refrigerator tilts in some way, adjust the height of the left/right foot of the refrigerator to be in
a horizontal level.
1. Turn the foot clockwise to raise the refrigerator.
2. Turn the foot counter clockwise to lower the refrigerator.
9 9
EN