Functional Description / Operating Instructions; Assembly Of The Lite-Ex ® Pl 10 H; Getting Started - Pepperl+Fuchs ECOM Lite-Ex PL 10 H Notice D'utilisation

Table of approved sealing rings and protective discs
Manufacturer
ecom
ecom

8. Functional description / operating instructions

Please read these operating instructions carefully so
that you are familiar with, and are able to use, all of the
functions of your Lite-Ex
information please read the instructions on the following
pages carefully!
8.1 Assembly of the Lite-Ex
Cap
Battery adapter
LED housing
Disc

8.2 Getting started

The supplied batteries must be inserted to begin with
(outside the Ex-area).
In order to be able to use the lamp in the Ex-area it must
be ensured that the lamp head and the body of the lamp
are screwed together tightly. The lamp can then be switched
on by lightly rotating the yellow ring switch clockwise.
PL 10 H. For your own safety and
®
Ring switch
Sealing ring 22.5 x 2.0
Lamp head
Model
Sealing ring type PL 10 H
Replacement disc PL 10 H
PL 10 H
®
Sealing ring 27.0 x 1.0
Sealing ring 22.5 x 1.5
Flashlight body
Fig. 1
21