ADEPT Telecom a.901 Mode D'emploi page 6

Loudspeaker volume: The loudspeaker volume can be set with the right-hand cursor.
Pulse / Tone
The a.901 can operate Tone or Pulse modes. The mode of operation can be selected with the switch on the
underside of the telephone. In Pulse mode, pressing
Definition of Flashing
A switch under the memo allows to choose the flashing between 100, 300 and 600 ms.
CALLING
To make a call
To redial the last external
no. dialled (BIS)
To store a dialled number
To redial a number
ANSWERING A CALL
Receiving a call
To answer a call
DURING A CALL
To switch to hands-free
mode
Call hold
TELEPHONE DIRECTORY
Your a.901 telephone can store up to 13 numbers:
3 numbers can be dialled directly by pressing the M1 - M3 buttons.(direct memories)
10 numbers can be dialled by pressing the "Mem" button followed by a number from 0 to 9.(indirect
memories)
The paper memo can be personalized by removing the plastic protection.
a.901 – 07-2005
switches to Tone mode.
and dial the number
, dial the number and press the "
and dial the number
Press . The number is associated with this button
You can redial this number by pressing
You can replace this number with another dialled number by pressing
this button again once you have dialled the new number.
The incoming call indicator flashes. The telephone rings (unless in
Silence mode)
You can switch to hands-free mode during a handset call by pressing
" ".
During a call, you can put a caller on hold so that he cannot hear you.
Press " ". The respective indicator comes on. If you were previously
in hands-free mode, it is deactivated.
Resume the call by pressing " " again.
. The call is put on hold and the indicator remains lit. You can
resume the call by pressing "
" button.
".
6