ADEPT Telecom a.901 Mode D'emploi page 5

In this quick reference guide,
indicates a manual operation or a sequence of operations to be performed in an order shown by
, or
PRESENTATION
a.901 is compatible with ADEPT Telecom PBXs and can be connected to the analogue public telephone
network (PSTN). Before connecting a.901 to another type of PBX, please check compliancy with your
equipment supplier.
Memory keys
Incoming call indicator
Mem
Memory access
Memory storage
R
Flashing
Mute
On hold
SETTING UP
Plug the "line" cord into the corresponding jack at the back of the telephone. This RJ11 / RJ11 cord will
be plugged into the supplied telephone socket adaptor.
Plug the handset cord into the corresponding jack on the side of the telephone.
WALL-MOUNTING
The a.901 telephone can be wall-mounted by inserting two wall-mounting screws into the holes on the
underside of the telephone.
Lift the handset and rotate the clip located below the handset rest. The handset will then be held in place
when wall-mounted.
PERSONNALISATION
Ringing melody: A switch at the back of the telephone allows you to choose from 3 ringer melodies.
Ringing volume control :
The switch at the back of the telephone allows you to choose from 3 ringer volume levels: High, Medium or
Silence. In the "Silence" mode, the "
a.901 – 07-2005
means "Pick up" and
" indicator flashes to signal incoming calls.
means "Hang up"
,
Ringing volume and
melody control.
Pulse / Tone
Loudspeaker volume
control
Easy redial
Redial
Handsfree
5