Victron energy BlueSolar 12/24-20 A Manuel page 8

Please note:
1. The load output will cut off in case of over load or short circuit. After the
first overload or short circuit the controller will resume to work
automatically after 30 seconds. Please check the load and press the
start push button to start when it happens again.
2. After over discharge, the load will reconnect when the battery is
charged to 13.1V/26.2V.
3. After over discharge, the load can be reconnected manually by pressing
the on/off push button, if the battery voltage exceeds 12.6V/25.2V.
8