Chauvet Professional Ovation E-260WW IP Manuel De Référence page 4

Ovation E-260WW IP QRG
Mounting
Product
Mounting
Diagram
Control Panel
Description
Passcode
Lens Tubes
Before mounting this product, read the
point per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our CHAUVET Professional line of mounting clamps,
go to http://trusst.com/products/.
Safety Cable
Mounting Clamp
Alternate Yoke Attachment
Secure the safety cable
using the passageway on
the back of the product.
*
Lens tubes sold
separately
Button
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases
<DOWN>
the numeric value when in a function
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
The following lens tubes are available for purchase:
·
19°, 26°, 36°, and 50° w/Gel frame (6.25 in/159 mm accessories)
·
15°–30° and 25°–50° Zoom Gel frame (7.5 in/191 mm accessories)
Safety Notes. Use at least one mounting
Overhead Mounting
Function
4
EN
Gobo Rotator Input
(for future use)