Publicité
Les langues disponibles
Les langues disponibles
Using the device
• O nce devices are paired, recently connected devices automatically connect to your
headset whenever you turn it on.
• T he NFC antenna area and the method for connecting via the Bluetooth feature
may differ depending on the device. For more information, refer to the device's
user manual.
Connecting to two devices
The headset can connect to two Bluetooth-enabled devices at the same time.
When you connect the headset to two devices, the last device you connect is recognised as
the primary device. The other device is recognised as the secondary device.
1
Connect the headset and the primary device via Bluetooth by using the NFC feature or by
connecting manually.
2
Slide the Power switch to pairing mode and hold it for 3 seconds.
The headset will enter Bluetooth pairing mode and the primary device will be
disconnected.
3
Repeat the first step to connect the headset to the secondary device.
4
Repeat the first step to reconnect the headset to the primary device.
• W hen the two connected devices play music simultaneously, the headset streams
audio from the device that first started playing. When you pause the currently
playing file, the file playing on the other device will play automatically.
• T his feature may not be supported on some devices.
Disconnecting from other devices
Turn off the headset or deactivate the Bluetooth feature. Alternatively, place the connected
device's NFC antenna near the NFC antenna area ( ) of the headset.
English(UK)
10
8
Publicité
