Rear Panel - Toshiba SD-3805 Manuel De L'utilisateur

Rear Panel

COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y P
AC Power Cord
Plug into the power source.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
Connect to an amplifier, receiver or stereo system.
Dust protection cap
Remove the dust protection cap from the OPTICAL
DIGITAL OUT jack and connect the optical digital cable
(not supplied) securely so that the configurations of
both the cable and the connector match. Keep the dust
protection cap and always reattach the cap when not
using the connector to protect against dust intrusion.
Dust protection cap
Select either S-VIDEO or COMPONENT, depending on
how you connect DVD Player to the TV.
Connect to a TV with S-Video inputs.
Connect to a TV with Y P
VIDEO OUT
Connect to a TV with video inputs.
ANALOG AUDIO OUT (Left/Right) 1, 2
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
VIDEO OUTPUT Switch
S-VIDEO OUT
P )
B R
P inputs.
B R
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
9