Led Indicators; Troubleshooting - Schweizer MULTILIGHT Pro Mode D'emploi

LED indicators

Indicator status description (only for rechargeable battery-operated models)
1. Flashing green light
2. Solid green light
3. Flashing red light and
light turns off every 60 seconds
Indicator light flashes / glows solid

Troubleshooting

Problem
1. MULTILIGHT Pro can't be switched
on.
2. Light goes off temporarily
(every 60 seconds).
3. Lamp switches off during use and
LED indicator on control panel
flashes red quickly.
4. Lamp arm position cannot be
changed.
20
–> Battery is charging
–> Battery is fully charged
–> Battery is empty, charging required
Light goes off temporarily
(every 60 seconds)
Solution
Connect the lamp to the power supply
before using it.
Plug in barrel connector into lamp foot.
Then plug power adapter into wall outlet.
–> p. 18
Rechargeable battery is almost empty.
Charge battery. –> p. 20
Temperature warning active. Switch off
and disconnect the device from the mains
supply. Leave it to cool, then switch on as
usual. –> pp. 18 /20
Lift the levers to unlock the joints before
positioning the lamp arm. Push levers
down to lock the lamp arm in place. –> p. 19