Schweizer MULTILIGHT Pro Mode D'emploi page 15

Safety and maintenance
Do not attempt to repair the
MULTILIGHT Pro lamp yourself or
to open the housing. This product
contains no user serviceable parts.
Any unauthorised attempt to service or
replace internal components will render
the warranty null and void.
Do not remove the built-in battery.
It cannot be replaced by the user.
Keep your MULTILIGHT Pro lamp away
from wet areas, rain and other
sources of moisture.
Do not rinse your MULTILIGHT Pro
lamp with water.
Charge/operate and store your
MULTILIGHT Pro lamp at an ambient
temperature of 10-35 °C.
Only use the supplied charger/power
adapter to charge the lamp. The round
barrel connector of the charger/power
adapter fits easily into the socket of
your MULTILIGHT Pro lamp.
Battery safety instructions
We place our batteries on the market in
line with legal requirements. Please read
the points below on the safe disposal of
our batteries:
The built-in rechargeable battery inside
the lamp cannot be removed.
To prevent harmful effects to the
environment and health, it is therefore
necessary to dispose of the entire lamp
at recycling centres or return it
to the point of sale.
Returning batteries is required by law
and free of charge for you.
Valuable raw materials such as zinc,
iron, nickel and so on can be recovered
by recycling used rechargeable
batteries.
The "crossed out wheelie bin" symbol
on products indicates that it is illegal to
dispose them along with normal refuse.
How to properly
charge your battery:
Charge the battery inside the lamp
immediately after it is drained
(approx. 3-hour charging time).
Avoid deep discharging of the
rechargeable battery as it could get
damaged otherwise.
Interim charging does not affect the
battery service life.
EN
15