Publicité
Les langues disponibles
Les langues disponibles
Safety, Operations and Maintenance
Save these instructions. Read and follow all warnings and cautions before using this carpet
extractor. This unit is intended for commercial use.
This spot extractor will afford you many years of trouble-free operating satisfaction, provided it is given proper care. All parts have
passed rigid quality control standards prior to their assembly to produce the final product. Prior to packaging, your spot extractor
was again inspected for assurance of flawless assembly.
This spot extractor is protectively packed to prevent damage in shipment. We recommend that upon delivery, you unpack the unit
and inspect it for any possible damage. Only a visual examination will reveal damage that may have occurred during shipping.
Important Safety Instructions
WARNING: Electric shock may occur if used on wet surfaces. Store indoors.
To reduce the risk of fire, electric shock or injury:
•
Use only as described in this manual. Use only the attachments recommended by the manufacturer.
•
Test all outlets with an outlet tester before plugging machine into any outlet. Plug cord into the nearest grounded outlet.
•
DO NOT unplug by pulling on the cord, grasp the plug. DO NOT pull unit by the cord.
•
Keep cord away from heated surfaces.
•
Never attempt adjustments or repairs while the machine is plugged in.
•
DO NOT use if cord or ground plug are damaged/broken.
•
DO NOT use outdoors, in standing water on wet surfaces.
•
DO NOT use volatile substances or operate where volatile substances exists,
•
DO NOT us water that is at a temperature of more than 120 degrees Fahrenheit.
•
DO NOT pick up flammable or combustible materials or use machine where they may be present.
•
DO NOT leave machine outdoors, in extreme heat or cold. Harsh weather elements will damage components and void
warranty.
•
DO NOT use solvents with this unit.
•
DO NOT use as a dry vacuum.
•
DO NOT use unless the unit is completely assembled.
•
Use only liquid detergents. Powders do not fully dissolve and can damage motor.
•
Always use a defoamer. Foam will suspend moisture particles that can damage the motor.
Grounding Instructions
IMPORTANT: Improper grounding method can result in a risk of electrical shock.
The machine must be grounded.
Electrical equipment must be grounded. If the machine should malfunction or breakdown, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. The Carpet Extractor is equipped with a cord containing a
grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded wire to a flat bed terminal. The grounding
wire is the wire with insulation and an outer green surface, with or without yellow stripes.
WARNING : Improper connection of the equipment grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet
installed by a qualified electrician. RINTENDED FOR USE ON A NOMINAL 120-VOLT SUPPLY CIRCUIT: the carpet
extractors have a grounding attachment plug that looks like the plug illustrated. Make sure that the carpet
extractor is connected to an outlet having the same configuration as the plug. No adaptor should be used with
these carpet extractors.
Do not expose to rain.
3
Publicité
