Fbt Archon Serie Mode D'emploi page 58

CONNECTIONS
THE ARCHON 208S / 215S ARE NOT
EQUIPPED WITH INTERNAL PASSIVE
CROSSOVER; A CONNECTION TO THE
POWER UNIT WITHOUT PROCESSOR WILL
DAMAGE THE SPEAKERS.
IN CH2
Speakon connectors are connected in parallel mode. One connector can be used to connect the box to the output of a power
amplifier, the other to connect to a second box.
Loudspeaker cables shall have the adequate diameter, depending on the overall lenght of the connection. The resistance
introduced by an inadequate wiring towards the loudspeakers would reduce both the power output and the damping factor of
the loudspeaker.
OUT 2
ARCHON
208S
54
ARCHON
DSP
208S / 215S
STEREO OUT CONNECTION
NEGATIVE OUT
POSITIVE OUT
TO SPEAKER