ICON ITC2500.R-PARENT Mode D'emploi page 21

Safety Instructions
This appliance is manufactured in accordance with the
safety regulations. Operation against the rules cause
harm both to the person and the appliance.
Please read the user manual carefully before you
operate your appliance.
You will find important information on installation,
safety, operation and maintenance in the User Manual.
Thus, you protect yourself and prevent damage to the
appliance.
If the power supply cable is damaged, this cable shall
be replaced by the manufacturer or its service agent or
an equally qualified personnel to prevent a hazardous
situation.
Inspect the carbon lamp on the appliance for cracks and
deformation.
Do not use the heater if the carbon lamp is damaged,
contact the authorized service.
The product shall be connected and installed by a
qualified electrician.
It is possible to connect/control multiple products to/on
the same electricity grid.
Check that mains line is 220-240V AC, 50/60Hz and
electrical connection is going through a fuse. Network
safety must be checked.
The fuse should be 16 Amps.
Plug your appliance's plug into a suitable grounded
socket.
4