Kettler Toys NEVADA 2 Mode D'emploi page 10

I Please note that there is always a danger of injury when working with tools or doing
manual work. Therefore please be careful when assembling this machine.
I Ensure that your working area is free of possible sources of danger, for example don't
leave any tools lying around. Always dispose packaging material in such a way that it
may not cause any danger. There is always a risk of suffocation if children play with pla-
stic bags!
I Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally
tighten nuts completely against resistance (locking device). Then check that all screw
connections have been tightened firmly. Attention: once locknuts have been unscrewed
they no longer function correctly (the locking device is destroyed), and must be repla-
ced.
I Please keep original packaging of this article, so that it may be used for transport
at a later date, if necessary.Goods may only be returned after prior arrangement
and in (internal) packaging, which is safe for transportation, in the original box
if possible.It is important to provide a detailed defect description / damage
report!
I For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
I When ordering spare parts, always state the full item number, spare partnumber, the
quantity required and the S/N of the product.
Example order: Art. no. 08876-700 / spare-part no. 13100000 / 1 piece /S/N no.
Important: spare part prices do not include fastening material; if fastening material
(bolts, nuts, washers etc.) is required, this schould be clearly stated on the order by
adding the words „with fastening material"
.
KETTLER (GB) Ltd. · KETTLER House, Merse Road · North Moons Moat · Redditch,
Worcestershire · B 98 9 HL · Great Britain
KETTLER International Inc. · 1355 London Bridge Road · VA 23450,USA
http://www.kettler.de
10