Publicité
Les langues disponibles
Les langues disponibles
Getting Started
Insert plug into the supply socket. Press
switch button, the machine begin to work.
You can adjust the airflow by pushing the
sliding block up and down.
Operation of blower
• Always wear safety goggles before using the blower.
• Keep bystanders clear from blowing debris.
• Wear a dust mask if blowing creates dust that might be inhaled.
1
Make sure that the power cord is disconnected from the socket.
Unscrew the inserted hose assembly from the suction port with a left-hand
2
rotation.
Insert the main cannula of the hose assembly into the air outlet on the top of the
3
head and tighten it with the right hand rotation.
4
Insert the power cord.
5
Start the switch button.
6
Hold the hose assembly, let outlet port aimed at the leaves and so on.
Using the Accessory
Wet floor nozzle
Bristle for
for floor, carpet,
Windows, table,
etc.
etc.
Crevice nozzle for
Blowing mouth for
crevice, corner,
blowing the dust
etc.
away in the crevice
of the machine.
EN
13
Publicité
