PNI ESCORT P03 B Manuel Utilisateur page 6

EN
Shift the gear back into parking position and remove the key from ignition
position.
9. Connect the power wires and the rear view mirror wires to the control unit
according to the wiring diagram.
Note: Wrap connections with electrical tape.
TESTING THE SENSORS
• Insert the car key into ignition position. Shift the gear to reverse position.
make sure your handbrake is on.
• First of all connect to the main unit only the sensor A.
Position about 2 meters in front of the sensor and move towards it. The distance
to the sensor should appear on the mirror as you approach the sensor.
Disconnect sensor A.
• Repeat this procedure for all sensors.
• Shift the gear back into parking position.
SPECIAL NOTES
The distance to the obstacle displayed on the screen may not be the same as
the real distance, as it is influenced by the following factors: the sensors are
dirty, the shape of the obstacle, the reflections etc.
Examples of special situations:
6 User manual