Emtec EKCOH420 Mode D'emploi page 2

2 in 1 Universal Remote Control
General Security Note
Technical manipulations of the product or any changes to the product are forbidden, because of security and
approval issues.
Please take care to set up the device correctly - consult your user guide. Children should use the device only
under adult supervision.
Avoid the following :
· strong mechanical wear and tear
· high temperature
· strong vibrations
· high humidity
Please also respect the additional security notes in the various user guide chapters. For questions not covered
from the user guide please contact our technical hotline or another specialist.
To ensure correct set up please read the manual and security notes carefully.
Battery change :
The device may only be used with CR03 battery - never try to connect to another power supply. When
inserting battery be sure the right polarity is used. Remove the battery when the device is not used for a long
period. Make sure that the batteries are not short circuited and are not disposed in fire (danger of explosion).
Batteries do not belong in children hands. Don't let batteries lay around openly - they might be swallowed by
children or animals. If this happens see a doctor immediately.
Leaking or damaged batteries can upon contact with skin cause burning or acid damage - if necessary use
suitable gloves.
Please dispose of batteries in accordance with local by laws.
Contents
1) Introduction
2) Put in the batteries
3) Functions of the key
4) Programming of the TV, VCR, DVD and SAT mode
5) Manual code search
6) Automatic code search
7) Identifying codes found
8) Default Volume Control for satellite
9) Troubleshooting
1) Introduction
The 2 in 1 Universal Remote Control is designed to control up to 2 devices (TV, VCR). The 2 in 1 Universal
Remote Control contains a library of codes that are pre-programmed into the remote control. This library covers
nearly all the audio video products on the market today.