To Fire The Flash Intentionally - Nikon One Touch Zoom 90s Manuel D'utilisation

To fire the flash intentionally

Use this mode to intentionally fire the flash regardless of
light conditions.
1.
Press the
on the LCD panel.
2. Make sure that the green LED lights up,
then release the shutter.
When the green LED is blinking with the Shutter Release button
pressed lightly, the flash is being charged, and the shutter cannot
be released. Take your finger off the Shutter Release button once
and lightly press it again. If the green LED is steadily lit release
the shutter.
26
Advanced Operations
Anytime Flash mode
button until " " appears
Example