AUTO-HAK T50A Instructions De Montage page 5

Towbar accessories:
Towing hitch (without electrical set)
T50A
Cat. no.
Class: A50-X
Designed for:
Manufacturer: KIA
Model: RIO II
Type: 5 doors
produced since 08.2005 till 09.2009
Approval number according to Directive 94/20/EC: e20*94/20*0167*00
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving whereat values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
PPUH AUTO-HAK Sp.J.
Produkcja Zaczepów Kulowych
Henryk i Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 6,4 kN
maximum trailer weight: 1100 kg
maximum vertical cup load: 50 kg
Foreword
Max vehicle weight [kg]
9,81
=
X
1000
Max vehicle weight [kg]
D [kN]