Publicité
Les langues disponibles
Les langues disponibles
NOTE: For save energy, the convert circuit only work when an USB disk be connected. You can
still play cassette even without USB disk.
6. Press "PLAY" button of the top, you should hear the sound from the cassette playing.
7. Turn the volume switch to a level you favor (usually be max is ok)
Convert and Playback:
1. Record in manually mode:
When the cassette playing and an USB flash is connecting, and the device is under standby
mode (indicator keep on), and the color of indicator is green shows it at default manually mode.
Just simply press the recording button then the
device will start to recording (converting)
the playing music to MP3 format, the green indicator will be quick flashing (if not, means not
recording, re-plug your USB flash and try again) . Press the recording button again to stop
recording and save a MP3 file in USB flash.
At the interval between two songs where you want to save in another file, short press
button, the flashing green indicator will be off about 2 seconds, then quick flash again to save in
another file.
If you want to do it at auto mode, simple at standby mode long press
button 3~5 seconds,
till you see the indicator from green to blue.
2. Recording in auto mode:
On auto mode, the portable cassette and audio digitizer will detect each interval between two
songs and will save them in two files. So normally, if you have 6 songs at side A(or B) of your
cassette, just put cassette in and play, then press record button, after 6 songs played, will
automatic save 7 mp3 files in your USB flash.(There will be 7 files for a 6 songs tape, the
FV0001~FV0006 will be the effective MP3 files for 6 songs, the last one FV0007 is an empty
th
one due to the short space between the end of 6
song to the end of whole tape.)
Device will create a new folder name "TAPEMP3" in your USB disk, and save each MP3 name
"FV0001 to FV9999"
If you want to switch back to manual mode from auto mode, stop recording(or playback) to
standby mode (blue indicator keeps on), long press button 3~5
seconds, till you see the
indicator from blue to green, or simply power off the portable cassette and audio digitizer, then
power on again, it will load at default----manually mode .
3. Use AUX port, you can also record music from other sources with a 3.5mm audio cable
(such as: radio, MD players, anything with audio line out)
18
Publicité
