Care & Maintenance; Resetting The Motor Thermostat - Nutri Ninja BL480DC Manuel Du Propriétaire

Care & Maintenance
Cleaning
CAUTION: Make sure that the motor base is
unplugged from the power source before
inserting or removing any attachment and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2 Hand-Washing: Wash the lids,
Pro Extractor Blades
™
When washing the Pro Extractor Blades Assembly,
use a dishwashing utensil with a handle to avoid direct
hand contact with blades. Handle Pro Extractor Blades
Assembly with care to avoid contact with sharp edges.
Rinse and air-dry thoroughly.
Dishwasher: The Nutri Ninja Cups, lids, and Pro
Extractor Blades Assembly are all dishwasher safe. The
lids and Pro Extractor Blades Assembly are top-rack
dishwasher safe. Ensure the Pro Extractor Blades
Assembly is removed from the cup before placing in the
dishwasher.
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp. Contact with the blades' edges can
result in laceration.
3 Wipe the motor base clean with a damp cloth
If the appliance needs servicing, please call customer
service at 1-877-646-5288.
Nutri Ninja Cups
®
Assembly in warm, soapy water.
Storing
1 Store the Nutri Ninja with Auto-iQ
blade assembly inside the corresponding container
with the lid secured on top.
top. Store the rest of the attachments in a safe place
where they will not be damaged and won't cause harm.
Loosely wrap the power cord around the motor base.
NOTE: DO NOT store blended or unblended ingredients
in the Nutri Ninja Cup with the Pro Extractor Blades
and
Assembly attached.

Resetting the Motor Thermostat

The Nutri Ninja with Auto-iQ features a unique safety
system that
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded, the
motor will stop. To reset the appliance, follow the
resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the cup and
jamming the Pro Extractor Blades Assembly.
3 Allow the appliance to cool for approximately 30
minutes.
4 Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as
not exceed the recommended maximum capacities.
upright with the
®
DO NOT place anything on
prevents damage to the unit's motor and
ensure no
before, making
ninjakitchen.com
food is
sure to
12