Care & Maintenance; Troubleshooting Guide - Nutri Ninja BL480EU Notice D'utilisation

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Use caution when handling the blade
assemblies as the blades are very sharp.
1
Separate/remove all parts from each other.
2
Clean the motor base with a damp cloth and wipe dry.
3
Place cups in the dishwasher. Place the lids, and
attachments on the top rack.
4 Carefully hand wash the lids, Nutri Ninja
blade assemblies in warm, soapy water with a soft cloth.

Troubleshooting Guide

PROBLEMS
Unit doesn't turn on
Unit doesn't turn off
Lid/blade assembly hard to
assemble
Food is not evenly chopped
Doesn't mix well, food gets
stuck
Unit moves on counter while
blending
Unit is difficult to remove
from counter for storage
OR
cups, and
®
Make sure the unit is plugged in.
Insert and rotate cup clockwise in the base until it "clicks". Display should turn on.
Remove cup from base by rotating cup anticlockwise and lifting out. Display should
turn off. Unplug the power cord from the outlet.
Set the cup on a level surface. Place the lid or blade assembly on the top of the cup
and align the threads so that the lid/blades sit flat on the cup. Twist clockwise so
that the lid/blades evenly align to the cup until you have a tight seal.
For best results when chopping, make sure all ingredients are as dry as possible.
Cut pieces down to even sizes, and reduce the amount of food in the cup. Use very
short pulses by quickly pressing the "PULSE" button.
Using the Auto-iQ
The pulses and pauses allow the food to settle towards the blade. If food is routinely
getting stuck adding some liquid will usually help.
When packing the cups, start with fresh fruit and vegetables, then add leafy greens
and herbs, then add liquids, next add powders/nuts, finally add frozen fruit and ice.
Make sure the surface as well as the feet of the unit are clean and dry.
Tip unit forward from the back to easily disengage the suction feet.
HOW TO STORE
1
Store the Nutri Ninja with Auto-iQ
Secure the power cord underneath the base by wrapping
the cord around the cord wrap. Do not place anything on
top. Store the cups and the rest of the attachments along
side the appliance where they will not be damaged and
won't cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja with Auto-iQ features a unique safety system
which prevents damage to the unit's motor and drive system
should you inadvertently overload your appliance. If the
appliance is being overloaded, the motor will stop. To reset
the appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2
Remove and empty the cup and ensure that no food is
jamming the blades.
3
Allow the appliance to cool for approximately 30 minutes.
4
Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before while making sure
not to exceed the recommended maximum capacities.
POSSIBLE REASONS & SOLUTIONS
Technology programs is the easiest way to achieve great results.
®
Technology upright.
®
www.ninjakitchen.eu 31