Publicité
bpt001_en:Layout 1
Le BPT001 convient à la commutation de panneaux de
chauffage, de radiateurs directs, de panneaux radiants,
BPT001 is suitable for switching heating panels, direct
de tapis chauffants, etc. Il commute l'appareil connecté
heaters, radiant panels, heating mats, etc. It switches the con-
en fonction des informations reçues de l'unité de
nected device according to the information received from the trans-
transmission (thermostat BPT010 ou BPT710).A installer dans
mitting unit (BPT010 or BPT710 thermostat). To be installed in
les pièces intérieures.
interior rooms. Do not locate near power lines!
Ne pas placez à proximité des lignes électriques!
Power supply
Communication type
Frequency
Sensitivity
Range
Output
Protection class
Protection rate
Working temp.
Dimensions
WARRANTY CERTIFICATE
(a 2-year warranty is granted for the product)
Product number:
Checked by:
W
e, ELEKTROBOCK CZ s.r.o., herewith declare that our product BPT001 conforms to
the basic requirements and other corresponding provisions of the directive 1999/5/ES.
Issued: 01.04.2012
TECHNICAL PARAMETERS
PARAMÈTRES TECHNIQUE
230 V/ 50 Hz
two-way
433.92 MHz
< - 92 dBm
150 m
relé, max.16A/ 250 VAC
IP20 or higher acc. to installation
II
0 to 40°C
49.5 mm x 45.5 mm x 26 mm
(LxWxD)
Date of sale:
Shop stamp:
DECLARATION OF CONFORMITY
MADE IN CZECH REPUBLIC
1.10.2012
(in free area),
In case of guarantee or
post-guarantee service, send
the receiver (including a copy
of the confirmed proof of
purchase) to the
manufacturer's address.
ELEKTROBOCK CZ s.r.o.
Blanenská 1763
Kuřim 664 34
Tel.: +420 541 230 216
www.elbock.cz
Pb
LEAD FREE
in compliance with RoHS
18:05
Page 4
20 m
(in built-up area)
on www.elbock.cz
Publicité
