Publicité
Les langues disponibles
Les langues disponibles
!
CAUTION: Never look directly into the laser beam!
• Please follow the instructions given in this manual.
• Do not try to repair or adjust the device by yourself. Repairs and service of the unit
only be made by the manufacturer or authorized workshops, otherwise the
guarantee will expire.
Use of the device
• The device is very robust. Nevertheless, handle the device with care.
• Regularly check before using the adjustment of your gauge to obtain the accuracy
or send it in an authorized workshop for checking.
• Each gauge should be checked and adjusted annually in an authorized workshop or
by the manufacturer.
• Use the device only within the specified temperature. The unit will not operate
properly if the temperature range is not adhered to.
• Avoid large and sudden changes in temperature. Allow the instrument to
acclimatize before use.
• Set the device at a height that is above eye level. This will protect you and passers
eye contact with the laser beam.
• While using the device on a tripod, make sure that the tripod is securely and firmly
and that the device is secured with the tightening screw.
• Any dirtiness of the optical surfaces at the outlet openings affects the beam quality
and range critical. Clean with swab, pay attention to lint.
• The unit can be used for indoor and outdoor applications.
Storage and transport
• Transport and store the device dry in its carrying case (do not leave in a car).
• Avoid strong vibrations and shocks during transport.
• Do not expose to extreme temperature fluctuations.
!
ATTN.: Never store the wet instrument in suitcase!
|
Gottlieb
NESTLE
GmbH
Freudenstädter Str. 37-43
WARNINGS AND SAFETY
Laser class 2
CEI 60825-1 (2007)
≤ 1 mW ; 635 - 670 nm
Always dry the wet instrument carefully!
|
72280 Dornstetten
|
|
Tel. 07443 / 9637-0
Email: info@g-nestle.de
|
www.g-nestle.de
Publicité
