Publicité
Les langues disponibles
Les langues disponibles
5. Modes & Functions
Normal mode
The main measuring method of VI-D4 meter is Normal mode. In this setting the measured value
is refreshed continuously
Max. Hold
If the measured area is not easily reachable and it is impossible to read the value while measuring,
the Max. Hold mode may be used. After choosing that mode the measured value is not refreshed
continuously. The meter will show only the highest value gained from numerous measurements.
Caution: Even single touching of sensor plate or electrodes during this mode will cause a highly inaccurate
outcome. That in turn will result in the need of repeating the whole measurement process. The measurement
in that set may be repeated by switching the mode into Normal and then into Max. Hold again.
Auto power off
To extend the battery life, the moisture meter is equipped with an automatic switch off function
that is activated 12 minutes after switching on the device. This function is always active and it
cannot be turned off.
Service Info
This mode enables to check some meter service information which include:
• total working time,
• quantity of switching-on,
• software version,
• date of production,
• batteries voltage.
This mode may be accessed by pressing and holding the SET button for 5 seconds and then by pressing
ON/HOLD button simultaneously. All the information will be shown as long as the SET button will be
held.
6. Power supply
VI-D4 meter is battery powered. It uses 2 AA type batteries. Both, rechargeable and standard
batteries may be used. Battery status shows the remaining capacity of the batteries. If the curren-
tly used batteries are almost out of charge, the battery icon will show empty.
While changing batteries into new ones both batteries should be replaced. Replace only with 2 of the same
type of batteries and only fully charged ones.
Battery arrangement scheme is shown in the picture below:
ELECTROMATIC Equipment Co., Inc. dba Checkline 600 Oakland Ave,
Cedarhurst, NY 11516, USA
T: (800) 645-4330 / (516) 295-4300
info@checkline.com, www.checkline.com
Publicité
