AUTO-HAK Z31 Instructions De Montage page 5

Towing hitch accessories:
Towing hitch (without electrical set)
Z31
Cat. no.
Class: A50-X
Designed for:
Manufacturer: MITSUBISHI
Model: OUTLANDER (CU)
produced since 04.2003 till 03.2007
Approval number according to Directive 94/20/EC: e20*94/20*0300*00
This towing hitch is designed according to rules of safety traffic regulations. The
towing hitch is a safety component and can be install only by qualified personnel.
Any alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the areas of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup mass are decisive for driving whereat values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x Max vehicle weight [kg]
+ Max vehicle weight [kg]
Max trailer weight [kg]
PPUH AUTO-HAK Sp.J.
Produkcja Zaczepów Kulowych
Henryk i Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 8,53 kg
maximum trailer weight: 1500 kg
maximum vertical cup load: 75 kg
Foreword
9,81
= D [kN]
X
1000