AUTO-HAK T39 Instructions De Montage page 5

Towbar accessories:
ø25xø13, L=49
ø17,2x2,35, L=49
ø17,2x2,35, L=58
After install the towbar you should get adequate note in registration book (at
authorised service station).The car should be equipped with:
Indicators
Tow mirrors
After 1000km check all bolts and nuts. The ball of towbar must be always kept
clear and conserve with a grease
NOTE
Towing hitch (without electrical set)
Cat. no. T39
Class: A50-X
Designed for:
Manufacturer: KIA
Model: RIO
Type: 5 doors, estate
produced since 01.2000 till 07.2005
Approval number acc. to regulations EKG/ONZ 55.01: E20-55R-01 1403
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving, and values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Haków Holowniczych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 6,4 kN
maximum trailer weight: 1100 kg
maximum vertical cup load: 50 kg
Foreword
Max vehicle weight [kg]
9,81
X =
1000
Max vehicle weight [kg]
D [kN]