Publicité
Les langues disponibles
Les langues disponibles
Figure 2. Fish-plates placement
After install the towbar you should get adequate note in registration book (at
authorised service station).The car should be equipped with:
•
Indicators
•
Tow mirrors
After 1000km of exploitation check all bolts and nuts. The ball of towbar must be
always kept clear and conserve with a grease.
NOTE
Towing hitch (without electrical set)
R12A
Cat. no.
Class: A50-X
Designed for:
Manufacturer: FIAT
Model: MAREA WEEKEND
Type: ESTATE
produced since 1996 till 2003
Approval number according to Directive 94/20/EC: e20*94/20*0814*00
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving whereat values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
Max vehicle weight [kg]
+
Max vehicle weight [kg]
Max trailer weight [kg]
PPUH AUTO-HAK S. J.
Produkcja Zaczepów Kulowych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www.autohak.com.pl
Technical data:
D-value: 8,02 kN
maximum trailer weight: 1400 kg
maximum vertical cup load: 70 kg
Foreword
9,81
D [kN]
X
=
1000
Publicité
