SECU Selo-B V.2 Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Battery replacement
You can see the battery status at any time using
the battery level indicator at the top right of the
display. If the battery capacity is running low,
a corresponding message appears on the display:
When this notice appears, change the batteries
as soon as possible.
Remove the screw on the underside of the
lock electronics. This will require a Torx T 8 screw-
driver. This is included in the scope of delivery.
Let the cover slide out together with the batteries.
Remove the old batteries and dispose of them
according to the disposal instructions on page
15. Replace the batteries with four new 1.5 V AA
Mignon batteries and according to the correct
polarity. For this purpose, illustrations are shown on
the battery holder. Please use branded batteries and
no rechargeable batteries.
Push the cover and batteries back into the locking
electronics and screw them tight.
SECU Selo – B V.2
Warranty
SECU products comply with the technical standards at the time of production
and adhere to our own quality standards. The guarantee only covers defects
Please change
which can be proved to have resulted from production or material defects at the
batteries!
time of purchase. The warranty ends after two years, further claims are excluded.
Defects and damage caused by e.g. transport, incorrect operation, improper use,
wear etc. are excluded from the warranty. The batteries are not included in the
guarantee. A short description of any defects identified must be made in writing
FUNC:
and the device returned to the place it was purchased, together with the original
packaging. After the device has been tested, and within a appropriate period of
time, the guarantor will decide whether or not to repair or exchange the item.
Attention:
In order to deliver a flawless and high quality product to you and to better assist
you in case of service or repair, it is necessary that faulty or defective devices
along with the valid administrator code be presented to your dealer together
with the original documentation.
For returns, all undamaged device parts must furthermore be in the factory
setting due to your right of revocation. Failure to comply with this will invalidate
the warranty.
Disposal of the device
Dear customer,
please help us avoid unnecessary waste. Should you intend to dispose of this
device at any time, please remember that many components of this device
contain valuable materials that can be recycled.
Please be aware that electrical and electronic equipment and
batteries marked in this way must not be disposed of with house-
hold waste but collected separately. Please obtain information
on the collecting points for electrical waste from the responsible
authority of your city/municipality.
SECU Sicherheitsprodukte GmbH hereby declares that this device
complies with the Directives 2014/30/EU, (EMC) and 2011/65/EU
(RoHS).
The complete text of the EU Declaration of Conformity is availa-
ble at the following Internet address: www.secu.biz
Safety recommendation
Please clean the keyboard operating surface periodically with a microfibre cloth
(e.g. glasses cleaning cloth for spectacles) to remove any fingerprints on the
keyboard surface.
Printing and typesetting errors as well as technical changes reserved.
English I 9

Publicité

Table des Matières
loading

Produits Connexes pour SECU Selo-B V.2

Table des Matières