AUTO-HAK X17A Instructions De Montage page 5

Towbar equipment:
Towing hitch (without electrical set)
Cat. no. X17A
Class: A50-X
Designed for:
Manufacturer: CHEVROLET
Model: LACETTI
Type: 5 doors
produced since 01.2005
Approval number acc. to regulations EKG/ONZ 55.01: E20-55R-01 1810
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max vertical
cup load are decisive for driving, and values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x Max vehicle weight [kg]
+ Max vehicle weight [kg]
Max trailer weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Haków Holowniczych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 6,80 kg
maximum trailer weight: 1200 kg
maximum vertical cup load: 75 kg
Foreword
9,81
=
X
1000
D [kN]