Publicité
Les langues disponibles
Les langues disponibles
Replacement Parts List
Keep this guide handy for
ordering replacement parts.
Troubleshooting Guide
Extreme hot or cold weather could affect the performance of the built-in sensors that detect
body heat. Certain winter clothing can shield a person's body heat from the sensor during
extreme cold weather. During extreme hot weather, the sensor may not be able to distinguish
the difference between normal body temperatures and the surrounding high temperatures.
The sensor will begin working normally once weather conditions return to normal.
Problem
Light does not come on
at night when motion
is detected.
Security light comes on
on during the day.
Security light cycles ON
and OFF continuously.
Security light comes on for 2. Light is sensing motion in
on for no apparent reason
at night.
Need Help?
In the event you are missing a part or have questions regarding installation
please visit our website at
call the Customer Care Center 1-800-291-8838,
8:30 a.m.-5 p.m., CST, Monday-Friday.
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of (6) years from the date of original purchase by the
consumer. The fixture is not warrantied for use in a commercial or retail application.
The warranty is limited to use in a residential environment. We will repair or replace (at
our option) the unit in the original color and style if available, or in a similar color and
style if the original item has been discontinued, without charge. Defective units must be
properly packed and returned to the manufacturer with a letter of explanation and your
original purchase receipt showing date of purchase. Call 1-800-291-8838 to obtain a
return authorization number and an address where to ship your defective product.
Note: C.O.D. shipments will NOT be accepted. The liability of the manufacturer is in any
case limited to replacement of the defective light fixture product. The manufacturer will
not be liable for any other loss, damage, labor costs or injury which is caused by the
product. This limitation upon the liability of the manufacturer includes any loss,
damage, labor costs or injury which is (I) to person or property or otherwise; (II)
incidental or consequential in nature; (III) based upon theories of warranty, contract,
negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the
sale, use, or repair of the product. This warranty gives you specific rights, and you may
also have other rights which vary from state to state.
Ecolight™ 5260 Capitol Drive, Wheeling, IL 60090
Cause
1. No power is being
delivered to the fixture.
2. Another light source is
causing the security light
to think it is daylight.
3. Wiring inside electrical
came loose.
1. Dusk-to-dawn sensor is in
a shaded area and it fooled
into thinking it is nighttime.
1. Dusk-to-dawn sensor
is faulty.
1. Dusk-to-dawn sensor is
sensing reflected light
from the security light.
the detection zone.
www.goodearthlighting.com/support
Ecolight™ Warranty
6 YEAR LIMITED WARRANTY
Hardware Kit
ZH-SE1039F02-TBZ
Solution
1. Check that circuit breaker and/or
wall switch power is on.
2. Turn off surrounding lights and/or
re-aim the sensor head.
3. AFTER turning power off to the
fixture, reconnect any loose wiring.
1. Shine a flashlight onto the light
sensor. If the security light turns off
then the fixture is mounted in an
area that does not allow enough
light to enter the sensor. Relocate
the security light.
2. If under warranty, contact
Customer Service.
1. Change the position of the light head,
aim light away from the reflecting
surfaces.
2. Put a small piece of black electrical
tape over the Dusk-to-dawn sensor.
3. Relocated the security light to a
different location where it no longer
causes reflected light.
1. Make sure the sensor is not picking
moving objects such as bushes,
trees, traffic, water, etc.
2. Test the motion sensor by covering
up the front curved lens with a
cardboard to block the view. If the
light turns off then something in the
detection zone is triggering the
sensor. Reposition the motion sensor
or change the sensitivity (distance)
of the sensor.
- 5 -
- 5 -
or
Printed in China
Publicité
