Signal; Rack Dry - Samsung DV50F9A6E Serie Manuel De L'utilisateur

Table des Matières

Les langues disponibles

operating instructions, tips

SIGnAL

The Sound Off function can be selected during all courses.

Activating

If you want to activate the Sound Off function, press the Mixed Load Bell button at the same time

for 3 seconds. The "Sound Off" will be lit when this feature is activated.

Deactivating

If you want to deactivate the Sound Off function, press the Mixed Load Bell button at the same

time for 3 seconds again.

When this function is selected, sound is turned off for all courses.

Even if the power is turned on and off repeatedly, the setting is retained.

Using the drying rack

1. Drying rack is installed in the drum at in default state.

2. When using this dryer for the first time, remove drying rack from the drum. Pull upwards

vertically and take the drying rack out of the drum. Remove the package and keep it properly.

3. When you need to use drying rack, refer to the following steps for installation.

Installing the drying rack

1. Open the dryer door.

2. Place the Drying Rack inside the product, and then align the holes of the filter handle of the

Drying Rack to the front projections.

3. Place the rear legs in the two recessed areas of the dryer's back wall, and then push down

the middle of the drying rack to fix it in place.

4. Place the items to be dried on the rack, leaving space between them so air can circulate.

5. Close the dryer door.

6. Press the RACK DRY ( DV50F9A6E(G)*/(DV50F9A7E(G)* ) button in Time Dry cycle, and then

select the time according to the moisture and weight of item.

Place the Drying Rack inside the dryer, align the holes of the filter handle of the Drying

Rack with the front projections, and then secure the back of the Drying Rack.

Table des Matières