Kodak UC103 Guide De Démarrage Rapide page 6

4 - Press the suction plate firmly against attaching position
and press the lever to lock.
5 - Check the strength of the suction.
6 - To adjust angle to either high or low angle, refer to image 7.
1 - The optional use of the included suction plate is for
unsmooth surfaces to be used in conjunction with sticky
gel suction base.
2 - Clean area where suction plate is to be placed.
3 - Peel o the protection sheet from the 3M suction plate and
fix to chosen area. (Then follow steps 2-5 of the above
suction base installation by placing the sticky gel suction
base on to the suction plate).
Nomal Angle
suction plate
HOW TO USE
06
Low Angle
image 7