Axis T8123 Guide D'installation page 6

Page 6
Installation
1. Connect the AXIS T8123 to an AC outlet (100-240 VAC), using a standard power cable.
2. Connect the unit Data In jack (input) to your remote Ethernet network switch using an Ethernet
cable.
3. Connect the Data & Power Out jack (output) to your Axis splitter or camera, using an Ethernet
cable.
Port connectivity
indicator
AC Input connectivity
indicator
Indicators
LED Color
Port Unlit
Flashing
Steady green
Green 1 Hz blinking
Green 4 Hz blinking
AC input Steady green
High PoE Midspan and Splitters Installation Guide
Data and Power out
Output port
Camera/splitters
Indication
No camera connected
Power overload or other input voltage error
Camera connected, normal behavior
Over current or short circuit condition on the port
PSE input voltage out of range or other internal fault
AC power connected
Data in
Input port
Ethernet