Publicité
Les langues disponibles
Les langues disponibles
Warranty
With the purchase of this product you purchased at the same time a two-
year warranty from date of purchase. The guarantee applies only to the
already existing material defects on the purchase of the product and / or
functional defects.
Excluded from the guarantee are:
Damage caused by incorrect use
Damage caused by neglect of duty of care
Damage caused by improper handling and maintenance errors
Liquid damage
For warranty claims, please contact your local dealer.
Should it be necessary to send the product, you must enclose a copy of
the
invoice
and
a
repair
www.robitronic.com. With direct sending to the service department must
be consulted beforehand (held by telephone or e-mail). The postage
costs borne by the consignor. Paid packages are not accepted.
Everyone sent in warranty case is first examined by our service
department on admissibility. For reject warranty claims will be charged
back to a control and processing fee before we return the product.
Repairs not covered under warranty, before the start of the repair must
be paid.
Important safety advices:
Before you start using the product, please make sure that you've read
this safety advices! Robitronic is not liable for any warrantee claims or
damages that occur from a nonobservance of these safety advices.
Electronic products and accessories are not suitable for children under
14 years! They're not toys and children should be carefully advised.
Ensure your batteries (both transmitter and vehicle) have been
properly charged for use with your model.
Never operate your model near traffic, bystanders, parking areas, or
any other area that could result in injury to people or damage to
property.
Always power on your transmitter before turning your vehicle on.
The product should be regularly checked for damages, especially
damages on the mains cable. In case of damage, the product must not
be used until it is repaired by a qualified person. (See our contact
details at the end of this manual for further advice)
The product must be protected from dust, moisture, direct sunlight,
heat and rain.
This product can only be used in arid rooms.
Products like charger or power supplies can be warm and light
humming during operation. This is normal and not a malfunction.
While using, the product must not be covered as the cases functions
as a heat sink. Make sure that air can circulate freely. Never leave the
product unattended!
Use the product only on a non-combustible surface.
Permissible current (USB connectors) must not be exceeded.
The mains cable must not be altered or coiled up during use.
Be sure to observe by connection of accessory equipment the
regulations and safety instructions of the respective equipment
manufacturer. Improper handling (voltage range to high, charging
currents or incorrect polarity), can damage or destroy the product.
Always make sure the insulation on both the case and the cable is
intact.
Keep the product away from transmitters (cell phones, remote
controls...) as their EMF can interfere the electronics of the product.
When the product is subjected to considerable temperature
differences, (especially from cold to hot) let the condensation dry up
first, before you use. Condensation water could otherwise destroy the
product.
Disconnect the product from the wall outlet if it is not used
Operation under adverse conditions is not permitted, include:
- High humidity
- Wet conditions
- Dust or combustible gases, vapors, solvents or benzene
- High temperature (> approx. +40°C)
- Heavy vibrations
If you may assume, that the product cannot be used safely any more,
you must immediately stop using it and secure it against unintended
operation. Such an assumption can be made if:
- is apparently damaged.
- malfunctions
- is stored in an adverse environment for prolonged periods of time.
LiPo Battery Warnings and Usage Guidelines
You must charge the LiPo battery in a safe area away from flammable
materials.
Never charge the LiPo battery unattended at any time. When charging
the battery you should always remain in constant observation to
order.
You
can
download
monitor the charging process and react immediately to any potential
problems that may occur.
After discharging the battery you must allow it to cool to ambient/room
temperature before recharging. Also, it is NOT necessary or
recommended to discharge the battery 'fully' before charging (LiPo
batteries have no 'memory' and it's safe to charge partially discharged
batteries when using an appropriate charger).
To charge the battery you must use only a special LiPo battery
charger. Failure to do so may result in a fire causing property damage
and/or personal injury. DO NOT use a NiCd or NiMH charger.
If at any time during the charge or discharge process the battery
begins to balloon or swell, discontinue charging or discharging
immediately. Quickly and safely disconnect the battery from the
it
at
charger, then place the battery in a safe, open area away from
flammable materials to observe it for at least 15 minutes. Continuing to
charge or discharge a battery that has begun to balloon or swell can
result in a fire. A battery that has ballooned or swollen even a small
amount must be removed from service completely.
Store the battery partially charged (approximately 50% charged/3.85V
per cell), at room temperature (approximately 25° C and in a dry area
for best results.
When transporting or temporarily storing the battery, the temperature
range should be from approximately 5°C-40°C. Do not store the
battery or model in a hot garage, car or direct sunlight whenever
possible. If stored in a hot garage or car the battery can be damaged
or even catch fire.
Do not over-discharge the LiPo battery. Discharging the LiPo battery to
a voltage that is too low can cause damage to the battery resulting in
reduced power, duration or failure of the battery entirely. LiPo cells
should not be discharged to below 3.0V each under load.
Disclaimer
As compliance with the instructions, the operations and conditions when
using the product at no time can be monitored by the manufacturer; the
manufacturer assumes no liability for damages, costs and / or losses
arising from incorrect use and / or incorrect operation or in any way
connected.
Declaration of Conformity (DOC)
Hereby, the manufacturer declares that this product is in compliance with
the essential requirements and other relevant provisions of EU
Directives.
The declaration of conformity may be consulted at www.robitronic.com
Disposal of Electronic Waste
Electronic waste is a commodity and must be disposed
through special electronic waste sites. Please inform yourself
about adequate facilities in your community area. Disposal of
this product through domestic waste is illegal.
Batteries / Accumulators
As a consumer you are legally obliged to return all empty /
defective batteries (Battery ordinance). Disposal in the
household garbage is prohibited!
Contaminated batteries / accumulators are labeled with
symbols that indicate the prohibition of disposal in domestic
waste. The designations for the respective heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead.
Your empty / defective batteries / rechargeable batteries you can bring
free of charge to the community collection or wherever batteries /
accumulators are sold.
Technical specifications, features and design are subject to change.
Publicité
