THOMSON HT220 Mode D'emploi page 21

• Press the switch at the rear side of the device
to turn the device ON or OFF.
• Press q on the device or on the remote control to start
the system.
Access to set-up menu
The home theater system is set up on the TV screen.
• Press on the remote control.
• Select a page on the
• Select an option and press ENTER to access other
parameters.
• Select the parameters and press ENTER
• Parameters highlighted in grey are not available or
• Once on a sub-menu, press a to go back to the main
menu.
• Press to exit the set-up menu.
format: Normal/PS (Pan-scan), Normal/Lb (letter size), Large
(16: 9).
HOME CINEMA
HT220
menu and press ENTER.
A DVD disk with a multi-angle option can be viewed from
different angles, depending on the disk and if the function
is enabled.
Select screen language.
Default language: English.
Subtitles
Enables display of all subtitles depending on the disk and if
the function is enabled.
Enables screen energy savings if the function is enabled.
HDCD
During disk playback HDCD enables sound setting.
Allows to resume playback where paused.
Note: Press 2x on 3 to cancel.
Available only in Karaoke version
or 5.1 Channel. Enables sound effects with two
speakers only or with all speakers at the same time.
• Front speaker: Selection of the size of front speakers.
• Center speaker: Selection of the size of the center
speaker.
• Rear speaker: Selection of the size of rear speakers.
• Subwoofer: Subwoofer enabled/disabled.
This DVD player has three audio outputs:
• : Analog surround sound is emitted through
output (12).
•
is emitted through coaxial output (20).
•
Comprises LPCM 48K and LPCM 96K for audio format.
• Equalizer type: Equalizer can be set to the following
predetermined parameters: Disabled, Rock, Pop, Live,
Dance, Techno, Classical and Slow.
• Bass: Bass enabled/disabled.
• Super bass: Super bass enabled/disabled.
• Treble: highlights treble sounds.
USE
: Digital surround sound
19 EN