Publicité
Les langues disponibles
Les langues disponibles
6.8 MESSAGES - DTMF DIAL
If the DTMF option is enabled (cf. §6.1), it is possible to call the Maestro in order to broadcast a message by dialling a
number.
If you dial number «1», the file held in the «DTMF > 1» folder will be broadcast.
So messages «DTMF > 1» to «DTMF > 9» are triggered by dialling number «1» to «9».
To make an announcement from the phone, you just have to dial «0» (cf. §6.6).
As with input contacts, there are parameters for the messages triggered by DTMF dial numbers «1» to «9» :
• 410;NB_BROADCAST_DTMF_1;1;
• 411;INTERVAL_BROADCAST_DTMF_1;0;
• ...
• ...
•
490;NB_BROADCAST_DTMF_9;1;
• 491;INTERVAL_BROADCAST_DTMF_9;0;
•
492;PRIORITY_DTMF_9;9;
• 493;VOLUME_DTMF_9;0;
• 494;RELAY_DTMF_9;1;
Default values for the various parameters are identical for all messages, except for priority.
The priority levels for messages triggered by DTMF dial are set to the values 1 to 9.
So messages triggered by DTMF dial «1» to «6» have the same priority level as those triggered by input contacts 1 to 6.
• 412;PRIORITY_DTMF_1;1;
•
422;PRIORITY_DTMF_2;2;
•
432;PRIORITY_DTMF_3;3;
• 442;PRIORITY_DTMF_4;4;
•
452;PRIORITY_DTMF_5;5;
•
462;PRIORITY_DTMF_6;6;
•
472;PRIORITY_DTMF_7;7;
• 482;PRIORITY_DTMF_8;8;
• 492;PRIORITY_DTMF_9;9;
Each message has a priority level, by default.
The value 0 corresponds to the maximal priority and 99 to the minimal priority.
6.9 OUTPUT RELAYS
The Maestro has 2 output relays which can be configured to be normally open (NO) or normally closed (NC).
• 311;TYPE_R1;2;
By default, the output relay R1 is normally open (2) and it is closed when activated.
The relay R1 can be normally closed (3) and it is opened when activated.
• 321;TYPE_R2;2;
By default, the output relay R2 is normally open (2) and it is closed when activated.
The relay R1 can be normally closed (3) and it is opened when activated.
These parameters allow to define the default rest position for each output relay.
Output relay activation can be configured for each message as well as for the phone announcement (cf. §5).
It is also possible to activate output relays during an error detection (cf. §6.4).
A normally closed default position is an interesting choice in case of an error detection use. Indeed, it allows to detect a
power failure of the Maestro, which will open the relay.
6.10 DATE AND TIME SETUP
To setup the product date and time, use the file «time.txt» included the µSD card :
- connect the Maestro to a computer using the USB cable
- open the file «time.txt» with a text editor
- set the value 1 in place of the 0 located at the beginning of the file
- set the date and time using the format : 17/06/16;09H00m00s;vendredi
- save the modifications (file > save) to setup the date and time for the Maestro
6/7
Publicité
