Epson WF-2860 Guide Rapide page 4

Loading Paper
Epson offers a wide array of high-quality papers, making it easy to maximize the impact of
your documents, photos, presentations, and other projects. For a list of compatible paper
types, see the online User's Guide.
■
Load paper printable side down; it is usually whiter or brighter.
■
Always load paper short edge first until it touches the back of the paper cassette and
make sure the edge guides are against the paper.
■
After you load paper, use the control panel to select the paper size and type.
■
For instructions on loading envelopes or legal-size paper, see the online User's Guide.
■
If paper has jammed, follow the steps on the LCD screen.
Solving Network Problems
If you have a network problem with your Epson product, check the messages on the LCD
screen to diagnose the cause of most problems. To view help topics on the screen, press
and then select
You can also check the basic troubleshooting suggestions below. For more in-depth
troubleshooting, see the online User's Guide or FAQs at www.epson.com/support (U.S.)
or www.epson.ca/support (Canada).
■
Try connecting to the wireless router or access point with your computer or another
device to confirm that it is working correctly.
■
Make sure that the wireless network supports 2.4 GHz. The product cannot connect
to a 5 GHz network.
■
Try restarting the router (turn it off and then on), then try to connect to it again.
■
Verify that the network settings are correct and check the signal strength. If it is poor,
try moving the product closer to your router or access point.
■
When using TCP/IP, make sure your network's DHCP option is enabled (your router
manufacturer will be able to assist you with this setting).
■
Print a network status sheet from the Settings menu on the product's control panel.
Press if necessary, and select
Network Status
■
Remove and reinstall your product software.
4
Loading Paper
or
Troubleshooting
>
Print Status Sheet
.
How To
>
Settings General Settings
. Then select
>
Network Settings
.
Print
>