EGAmaster ROSCAMATIC 50-2 Manuel D'instructions page 9

Total capacity
Condenser motor
Max capacity of the plate
Carriage run
Automatic oiling
Size
Weight
Differential
Thermomagnetic
The user must ensure that the electrical system where the machine is connected must have the
following protections:
2x25A/30mA or 2x40A/30mA differential and 2x16A thermomagnetic.
A) SETTING THE PIPE
A1- Open both chucks and insert the pipe through the rear chuck side and the front chuck (in this
order).
A2- Holding the right end of the pipe in your right hand, lock both chucks with a knocking movement.
A1
B) LOOSE THE PIPE
A sharp jerk will release the pipe.
B
TECHNICAL SPECIFICATIONS
1/4÷2"
1100W (230V/50-60Hz) (110V/50-60Hz) R.P.M.=28
65 mm.
140 mm.
635x400x440 mm.
73 kg.
REQUIREMENTS OF THE ELECTRICAL SYSTEM
25A/40A/30mA
2x16A
OPERATION GUIDE
A2
B
9