English - EGAmaster ROSCAMATIC 50-2 Manuel D'instructions

ENGLISH

Attention! Be careful.
1. Do not wear loose clothing. They could be caught by moving parts of the machine.
2. For outdoor work, rubber gloves must be worn.
3. Before starting up the machine, check that the electric cable and switch are in optimum
condition.
4. Before carrying out any maintenance work or change of accesories, disconnect the machine
from the mains.
5. Always use the machine´s indicicated accesories because if you don´t, it could lead to risk of
personal injury.
This is suitable for threading, cutting and reaming ¼÷2" water, electricity and gas pipes. Besides
having compact structure, simple operation and higt efficiency.
Theese threading machines have been widely applied in installing and building industries.
- 1 die head ½-2"
- 2 set of dies (1/2-3/4") and (1-2") BSPT or NPT.
- 1 set of legs.
- 1 oil can of 5 litres maker's.
- Conexion for foot pedal
- 2 screw drivers (5,5x25 and PH-2).
- Set of 3 Allen keys (4mm, 5mm and 6mm).
IMPORTANT
When ordering spare parts please indicate its code number and serial number of the machine.
8
SAFETY INSTRUCTIONS
THREADING MACHINES – 2
EQUIPMENT