Air Live WN-200R Guide D'installation Rapide page 5

Basic Information
Default Setting:
IP Address:
Subnet Mask:
Login:
LED Indicators
Power LED
On - Power on.
Off - No power.
WiFi LED
On - Idle.
Off – non Connection
Flashing - Data is being transmitted or received via the Network.
Internet LED
On - Internet connection is available.
Off - non Connection.
Flashing - Data is being transmitted or received.
WAN LED
On - Connection to the Broadband Modem attached to the WAN (Internet) port is established.
Off - non Connection.
Flashing - Data is being transmitted or received via the WAN port.
LAN LEDs
For each port, there are 1 LED
10 (Orange)/100 (Green)
•
•
•
Reset
This button has two (2) functions:
•
Button
•
•
WPS Button
192.168.1.254
255.255.255.0
admin
On - Corresponding LAN (hub) port is active.
Off - non Connection.
Flashing - Data is being transmitted or received via the corresponding LAN (hub) port.
Reboot. When pressed and released, the Wireless Router will reboot (restart).
Clear All Data. This button can also be used to clear ALL data and restore ALL settings
to the factory default values.
Press for the WPS Connection
WN-200R
Password:
Wireless Model SSID:
Channel:
airlive
airlive
6
English
3
3