Before First Use - Klarstein SILENT COOL Mode D'emploi

BEFORE FIRST USE

• Clean the appliance, and be thorough, especially in the interior (See „Cleaning
and Care").
• In case the interior accessories are not correctly placed, rearrange them as
described in chapter „Product Description".
Use and Operation
1 Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth.
2 Clean the interior with a clean moist cloth.
3 Insert the power supply cord into the socket.
4 Tum the thermostat dial to „5" or „low".
5 Close the door and let the refrigerator and operate it emty for 1-2 hours, before
you store any food inside.
Normal Operating
When the refrigerator works with full power, the two LEDs on the circuit board will flash.
The red one shows the power input status. The green one shows the output status of the
cooling system. Meanwhile the fan inside the refrigerator begins to work When the door
is opened, the light under the temperature adjuster will turn on automatically.
Temperature Control
To control the internal temperature, adjust the thermostat Dial „high" is the warmest
Setting to ‚low' is the coldest The temperature range fur refrigerator is 4.5-15°C. When
the temperature is set on one certain point and the temperature inside reaches this point,
the automatic temperature control system begins to work and the cooling system goes
into linear temperature keeping status .
Note: Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may
fail to operate properly if restarted too quickly.
EN
25